Welcome to visit our website!

TEL:  0086-533-4130877 / 0086-533-4130933

0533-4130877 / 4130933

Service hotline

COPYRIGHT © 2018   Zibo Huacheng Pump Industry Co., Ltd. 鲁ICP备18038278号-1  Powered by www.300.cn

FAX: 086-0533-4138088

TEL: 0086-533-4130877 / 0086-533-4130933

E-MAIL: huacheng@huachengpumps.com
ADD: No. 299, West Crossing Road, Boshan District, Zibo City 

 

PRODUCTS CENTER

无标题文档

All products

ZJLA vertical slurry pump

The material of the ZJLA vertical slurry pump over-current component is a new generation of high-chromium wear-resistant alloy developed by the company based on recent scientific and technological ach
没有此类产品
Details

 

2, ZJLA type vertical slurry pump equipment material description

The material of the ZJLA vertical slurry pump over-current component is a new generation of high-chromium wear-resistant alloy developed by the company based on recent scientific and technological achievements. While developing the slurry pump, our company has gathered experienced professional technicians to develop a new generation of high anti-wear materials. The metallographic structure of the material achieves a reasonable match between the hard M7C3 type carbide and the strong martensitic metal matrix, the Rockwell hardness reaches HRC58~62, has high anti-wear material and corrosion resistance, and has good comprehensive machinery. The performance, so that our company's products in the life of the overcurrent parts, compared with other similar products have greatly improved, by the user's drink.

3. ZJLA vertical slurry pump equipment and structural features

The ZJLA vertical slurry pump is a vertical axial suction single-stage single-suction centrifugal slurry pump. ZJLA type slurry pump is mainly composed of impeller, volute, rear guard plate, bushing, bracket, support plate, shaft, bearing and bearing body. The impeller, the volute and the rear guard are made of high-chromium alloy cast iron. The impeller and the shaft are threaded, and the volute, the bracket and the bearing body are connected by bolts. The pump shaft and the motor can be driven by a coupling direct drive or a pulley. The bearings of the ZJLA pump are greased. This series of pumps is a shaftless seal pump.

A, pump head structure

The pump body is a single-layer pump casing with small installation size and light weight.

A labyrinth gap seal is arranged between the impeller and the rear guard plate, which greatly reduces the leakage amount of the slurry, improves the volumetric efficiency, and has remarkable energy saving effect.

The impeller is provided with a back blade, which discharges the slurry in time, thereby improving the volumetric efficiency, reducing the backflow erosion and improving the life of the flowover member.

In order to prevent large particles from entering the impeller, the impeller is blocked, and a lower filter is provided at the inlet and outlet.

B, bearing body structure

In order to facilitate the lubrication of the bearing, and to extend the service life of the bearing, it is optimized from the hydraulic design and structural design. The radial force is reasonably distributed, and the bearing form, model, lubrication method, etc. are correctly selected, thereby achieving the requirements of low heat generation and high life of the bearing.

C, other forms

A liquid level line is provided on the support, and the slurry must pass through the liquid level line when the pump is started. The structure can be changed according to the actual situation of the user pool to meet the industrial and mining requirements.

ZJLA type slurry pump water performance

华成泵业华成泵业

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Key words
Previous article
Next article